Richtlinien

We accept several data formats for PCB layout, following these simple rules: Artwork (these normally are related to t...

Classification Introduction “Pattern and Drill Specification” are used shorthandly to measure the manufacturability o...

1. Our CAM systems ALWAYS considers tool lists for drill files as finished hole sizes (ENDSIZE): anular ring values a...

COPPER LAY OUT - conductive layers 1. “Flashes” for pads are required when generating output; it is kindly suggested ...

1. A mechanical layer in the data set (gerber) is always required. It is to be considering that a full up mechanical ...

1. Due to alignment process the soldermask clearances over copper pads must be compensated for the pcb production acc...

1. The printing processes for legend on the pcb is the inkjet printing ( except for PcbOnDemand service where also ph...

1. Sometimes few copper elements or patterns of the pcb are used for keyboard contacts, LCD contacts, jumpers, etc......

1. Using the plug in ( or ViaFilling) process and materials is the only way to guarantee to get a completely closed v...

1. It is possible to project panel of pcbs all with same design: the number of pcb in the panels depend of the chosen...